¡¡AVISO IMPORTANTE!!
Brumal. Revista de Investigación sobre lo Fantástico/Brumal. Research Journal on the Fantastic forma parte del servicio de publicaciones de la Universidad Autónoma de Barcelona. Los servidores de la universidad han sufrido un ciberataque que ha dejado fuera de servicio a nuestra plataforma web, por lo que en esta pestaña los/as lectores/as y autores/as tendrán acceso a la información más relevante para enviarnos sus artículos hasta que se restablezca la operatividad de la revista.
Correo electrónico: revista.brumal@gmail.com
SOBRE LA REVISTA (English below)
ENFOQUE Y ALCANCE
Brumal. Revista de Investigación sobre lo Fantástico/Brumal. Research Journal on the Fantastic se presenta como una publicación interdisciplinar y multilingüe destinada a investigadores/as y especialistas.
Concebido lo fantástico como una confrontación siempre problemática entre lo real y lo imposible en un mundo como el nuestro, quedan excluidos de Brumal.Revista de Investigación sobre lo Fantástico/Brumal. Research Journal on the Fantastic otros géneros no miméticos que no se ajustan a dicha definición, como la ciencia ficción, lo maravilloso o el fantasy.
Vinculada al Grupo de Estudios sobre lo Fantástico (GEF) de la Universidad Autónoma de Barcelona (www.lofantastico.com), Brumal. Revista de Investigación sobre lo Fantástico/Brumal. Research Journal on the Fantastic abre sus páginas a trabajos sobre lo fantástico en sus diversas manifestaciones artísticas (narrativa, teatro, cine, cómic, pintura, fotografía, videojuegos, TV y radio) en cualquier lengua o país a lo largo de los siglos XIX, XX y XXI. Los textos podrán estar escritos en español, catalán, gallego, inglés, francés, portugués e italiano.
Brumal. Revista de Investigación sobre lo Fantástico/Brumal. Research Journal on the Fantastic se estructura en tres secciones diferenciadas (Monográfico, Miscelánea y Reseñas) y tiene una periodicidad semestral (junio y diciembre).
POLÍTICAS DE SECCIÓN
PROCESO DE EVALUACIÓN POR PARES
FRECUENCIA DE PUBLICACIÓN
Brumal. Revista de Investigación sobre lo Fantástico/Brumal. Research Journal on the Fantastic se estructura en tres secciones diferenciadas (Monográfico, Miscelánea y Reseñas) y tiene una periodicidad semestral (junio y diciembre).
NORMAS DE ENVÍO PARA LOS/AS AUTORES/AS
Los artículos que se envíen a Brumal. Revista de Investigación sobre lo Fantástico/Brumal. Research Journal on the Fantastic pueden estar escritos en español, catalán, gallego, inglés, francés, portugués e italiano. Deben ser originales e inéditos, y no estar a la espera de aceptación por ninguna otra publicación.
La redacción de Brumal. Revista de Investigación sobre lo Fantástico/Brumal. Research Journal on the Fantastic se compromete a notificar a los/las autores/as, en un plazo máximo de seis meses, la aceptación o desestimación de sus trabajos. De acuerdo con los resultados de los informes realizados por los evaluadores/as, en determinados casos la redacción de Brumal. Revista de Investigación sobre lo Fantástico/Brumal. Research Journal on the Fantastic podrá solicitar a los/las autores/as que efectúen modificaciones en sus trabajos para que puedan ser publicables.
ES IMPORTANTE QUE TODOS LOS AUTORES INCLUYAN SU ORCID DURANTE EL REGISTRO, así como el DOI de las referencias bibliográficas.
Advertimos que los autores/as deberán aceptar las recomendaciones de nuestros evaluadores externos, así como adaptar sus manuscritos a las normas ortotipográficas de Brumal. Revista de Investigación sobre lo Fantástico/Brumal. Research Journal on the Fantastic. En el caso de que, una vez evaluados positivamente, dichos requisitos no se cumplan, los manuscritos serán rechazados para su publicación.
· Recomendamos a nuestros autores/as el uso del lenguaje inclusivo en los artículos científicos.
· Nuestra revista contempla en su política editorial que los autores/as informen sobre el criterio escogido para decidir el orden de la firma y sobre la contribución específica realizada por cada uno/a de ellos/as a los trabajos publicados.
· Los artículos deben indicar la(s) agencia(s) de financiación y el(los) código(s) del (los) proyecto(s) en el marco de los que se ha desarrollado la investigación que ha dado lugar a la publicación. Este dato debe aparecer referenciado en el artículo.
Extensión y formato de los trabajos
· Los artículos no podrán superar las 9.000 palabras, incluyendo resúmenes, palabras claves, notas y bibliografía.
· Todas las colaboraciones se enviarán a través de la web de la Brumal (los autores/as tienen que registrarse) y deberán ajustarse al siguiente formato:
· Los trabajos se enviarán en formato Word.
· Tipo de letra Times New Roman, cuerpo 12.
· Interlineado de 1,5; sin espaciado anterior ni posterior entre párrafos.
· Sangría en la primera línea del párrafo de 1,25 cm.
Formato de la página inicial
La página inicial del artículo deberá incluir únicamente los siguientes elementos:
· Título del artículo en la lengua en la que esté escrito.
· Resumen, con una extensión máxima de 150 palabras, en la lengua en la que esté escrito el artículo.
· Hasta cinco palabras clave en la lengua en la que esté escrito el artículo.
· Traducción al inglés del título del artículo.
· El resumen del artículo en inglés.
· Las palabras clave del artículo en inglés.
Normas tipográficas
Fuente: La letra empleada será Times New Roman, tamaño 12, para el texto y la bibliografía final, y Times New Roman, tamaño 10, para las notas a pie de página y las citas en párrafo aparte. No se utilizará ni la negrita ni el subrayado.
Alineación: Justificada.
Interlineado: El interlineado será de 1,5 para el texto. En las notas a pie de página y en las citas en párrafo aparte se utilizará el interlineado sencillo. No hay que dejar espacio o línea en blanco entre párrafo y párrafo, por lo que se tiene que sangrar el inicio de cada párrafo, sangría que deberá hacerse con la opción específica del menú formato o diseño de párrafo; en ningún caso se empleará para este fin la barra espaciadora ni la tecla de tabulación. La sangría de los párrafos será, por defecto, de 1,25.
Notas al pie: Cuando la nota se refiera a toda la frase, la llamada irá después del signo de puntuación. En cambio, si sólo se refiere a una palabra, la llamada de nota irá junto a ella. El número de la llamada de nota irá volado y sin paréntesis.
Sistema de citas: La redacción de las referencias bibliográficas deberá seguir las pautas del sistema Harvard. He aquí algunas indicaciones:
· Toda cita, directa o indirecta, deberá remitir a la bibliografía final.
· La supresión de texto dentro de una cita se indicará con tres puntos suspensivos entre corchetes: […].
· La inclusión de las citas se realizará indicando la referencia según el siguiente esquema: (Apellido, año: página/s). Si el nombre del autor/a estuviera citado en el texto, junto a él sólo se indicará entre paréntesis (Año: página/s).
· En caso de no citar páginas concretas, sino la obra entera de un autor/a, se indicará junto al apellido de éste entre paréntesis el año de edición de la obra a la que se hace referencia.
· Cuando se citen páginas web en donde no conste ninguna fecha, entre paréntesis se anotará la fecha de consulta o de actualización de la web; si el documento no está paginado, no se incluirá la página citada.
· Cuando se citen varias obras de un mismo autor/a publicadas el mismo año, se usarán letras minúsculas junto al año de edición del texto (a, b, c…) para diferenciarlas.
· Las citas de hasta cinco líneas de extensión se incluirán en el cuerpo del texto, entrecomilladas con comillas latinas: « ».
· Las citas superiores a cinco líneas se incluirán en párrafo aparte, en tamaño de letra 10 e interlineado sencillo sin comillas. El párrafo se sangrará por la izquierda 2 centímetros.
· Las citas y referencias de textos en lenguas románicas no tienen que traducirse.
Imágenes: Si los textos van acompañados de imágenes, éstas se enviarán en alta resolución (300dpi) y deberán respetar los derechos y disponer de las licencias pertinentes bajo responsabilidad exclusiva del autor/a del artículo. Las imágenes deben insertarse en el texto acompañadas de un pie de foto en el que se indique el número de la imagen (se numerarán correlativamente) y el título o leyenda de la misma, si fuera necesario. El pie de foto se escribirá centrado en Times New Roman, cuerpo 12, de la siguiente manera y centrado: Figura x. Leyenda.Cuando el texto haga referencia a una imagen se debe indicar en el cuerpo de texto de qué imagen se trata, de la siguiente manera: (Figura x).
Bibliografía: Las referencias bibliográficas aparecerán al final del artículo, ordenadas alfabéticamente por el apellido del autor/a, con el texto justificado, interlineado sencillo y sangría frances. Como norma general, el apellido del autor/a se escribirá con letras versales. Cuando se repita la cita de un autor/a no se utilizará el guión largo, se tienen que volver a incluir todos los datos del apellido y el nombre del autor/a. Los títulos de las obras irán en cursiva y los de los capítulos de libro y los artículos, entrecomillados:
Todas las referencias bibliográficas con número DOI (Digital Object Identifier) deben aparecer con su número DOI siguiendo el siguiente esquema: <http://dx.doi.org/numeroDOI> (ver: http://papers.uab.cat/article/view/v99-n1-gonzalez-ramos-lamolla/pdf-es). Se pueden buscar las referencias bibliográficas con DOI en https://www.crossref.org/documentation/reference-linking/how-do-i-create-reference-links/
Libros:
Apellido(s), Nombre (año): Título de la obra, (traductor [trad.], cuando sea pertinente) Editorial, Lugar de publicación.
Capítulos de libro:
Apellido(s), Nombre (año): «Título del capítulo», en Nombre y Apellido(s) del editor (ed.), Título de la obra, (traductor [trad.], compilador [comp.], prologuista [pról.], etc., cuando sea pertinente), número de tomo o volumen en versales [si lo hubiera], Editorial, Lugar de publicación, páginas (pp.).
Artículos:
Apellido(s), Nombre (año): «Título del artículo», Título de la revista, número (núm.), Fecha (entre paréntesis), páginas (pp.).
Ponencias de congresos:
Apellido(s), Nombre (año): «Título de la ponencia», en Nombre y Apellidos (ed.),Título del documento fuente, Editorial, Lugar de publicación, páginas (pp.).
Películas:
Apellidos, Nombre del director (dir.) (año): Título en el idioma original (Título traducido si se utiliza una versión en otro idioma), Productora, País.
Series de televisión:
Apellidos, Nombre del creador (cr.) (año): Título en el idioma original (Título traducido si se utiliza una versión en otro idioma), Productora, País año de la 1ª temporada-año de la última temporada (no poner el último año si la serie se sigue rodando).
Artículos en red:
Apellido(s), Nombre (año): «Título del artículo», en Título de la publicación digital[si la hubiera], Año, disponible en <http://www…> [fecha de consulta].
ENFOQUE Y ALCANCE
Brumal. Revista de Investigación sobre lo Fantástico/Brumal. Research Journal on the Fantastic se presenta como una publicación interdisciplinar y multilingüe destinada a investigadores/as y especialistas.
Concebido lo fantástico como una confrontación siempre problemática entre lo real y lo imposible en un mundo como el nuestro, quedan excluidos de Brumal.Revista de Investigación sobre lo Fantástico/Brumal. Research Journal on the Fantastic otros géneros no miméticos que no se ajustan a dicha definición, como la ciencia ficción, lo maravilloso o el fantasy.
Vinculada al Grupo de Estudios sobre lo Fantástico (GEF) de la Universidad Autónoma de Barcelona (www.lofantastico.com), Brumal. Revista de Investigación sobre lo Fantástico/Brumal. Research Journal on the Fantastic abre sus páginas a trabajos sobre lo fantástico en sus diversas manifestaciones artísticas (narrativa, teatro, cine, cómic, pintura, fotografía, videojuegos, TV y radio) en cualquier lengua o país a lo largo de los siglos XIX, XX y XXI. Los textos podrán estar escritos en español, catalán, gallego, inglés, francés, portugués e italiano.
Brumal. Revista de Investigación sobre lo Fantástico/Brumal. Research Journal on the Fantastic se estructura en tres secciones diferenciadas (Monográfico, Miscelánea y Reseñas) y tiene una periodicidad semestral (junio y diciembre).
POLÍTICAS DE SECCIÓN
- Monográfico: Los artículos pueden estar escritos en español, catalán, gallego, inglés, francés, portugués e italiano. Deben ser originales e inéditos, y no estar a la espera de aceptación por ninguna otra publicación. Su extensión máxima es de 9.000 palabras. Los artículos serán revisados por dos expertos/as, mediante el sistema de doble ciego.
- Miscelánea: Los textos pueden estar escritos en español, catalán, gallego, inglés, francés, portugués e italiano. Deben ser originales e inéditos, y no estar a la espera de aceptación por ninguna otra publicación. Su extensión máxima es de 9.000 palabras. Los artículos serán revisados por dos expertos/as, mediante el sistema de doble ciego.
- Reseñas: Son textos breves que comenten e informen críticamente sobre un libro o monografía recientemente publicada sobre cualquier aspecto ligado a lo fantástico.
PROCESO DE EVALUACIÓN POR PARES
- Brumal. Revista de Investigación sobre lo Fantástico/Research Journal on the Fantastic prevé para la selección de sus artículos el sometimiento de cada uno de ellos a una evaluación a cargo de expertos/as en el área. Sin embargo, los artículos recibidos pueden ser rechazados en una primera lectura, por parte del comité editorial, si no reúnen los criterios necesarios en términos de calidad y contenido.
- La evaluación de los trabajos correrá a cargo de expertos/as externos tanto a la entidad editora como a su comité de redacción. Todos los artículos recibidos se someterán a la valoración, como mínimo, de dos especialistas. La política de revisión de la revista se lleva a cabo a través de la evaluación ciega por pares, de modo que ni autores/as ni revisores/as conozcan la identidad de la otra parte.
- Los/las revisores/as son escogidos/as entre reconocidos/as profesionales de la materia abordada por los artículos, de ámbito universitario, tanto nacionales como internacionales.
- Los/las evaluadores/as emitirán sus respectivos informes al comité editorial, quien en última instancia se hace responsable de la decisión final sobre la publicación de los trabajos. En el momento de notificar a los/las autores/as la decisión definitiva, se les enviará los informes respectivos.
La revista se reserva el derecho de postergar la publicación de un artículo previamente seleccionado por motivos de programación interna, tras notificarlo a su autor/a. Asimismo, se reserva el derecho de cancelar la publicación de un artículo previamente seleccionado en caso de que no cumpla con los plazos requeridos por el comité editorial durante su proceso de selección o producción. Es responsabilidad de los/las propios/as autores/as cumplir con los plazos requeridos en cada etapa de la presentación y producción. - El tiempo máximo de revisión de un artículo es de 6 meses.
FRECUENCIA DE PUBLICACIÓN
Brumal. Revista de Investigación sobre lo Fantástico/Brumal. Research Journal on the Fantastic se estructura en tres secciones diferenciadas (Monográfico, Miscelánea y Reseñas) y tiene una periodicidad semestral (junio y diciembre).
NORMAS DE ENVÍO PARA LOS/AS AUTORES/AS
Los artículos que se envíen a Brumal. Revista de Investigación sobre lo Fantástico/Brumal. Research Journal on the Fantastic pueden estar escritos en español, catalán, gallego, inglés, francés, portugués e italiano. Deben ser originales e inéditos, y no estar a la espera de aceptación por ninguna otra publicación.
La redacción de Brumal. Revista de Investigación sobre lo Fantástico/Brumal. Research Journal on the Fantastic se compromete a notificar a los/las autores/as, en un plazo máximo de seis meses, la aceptación o desestimación de sus trabajos. De acuerdo con los resultados de los informes realizados por los evaluadores/as, en determinados casos la redacción de Brumal. Revista de Investigación sobre lo Fantástico/Brumal. Research Journal on the Fantastic podrá solicitar a los/las autores/as que efectúen modificaciones en sus trabajos para que puedan ser publicables.
ES IMPORTANTE QUE TODOS LOS AUTORES INCLUYAN SU ORCID DURANTE EL REGISTRO, así como el DOI de las referencias bibliográficas.
Advertimos que los autores/as deberán aceptar las recomendaciones de nuestros evaluadores externos, así como adaptar sus manuscritos a las normas ortotipográficas de Brumal. Revista de Investigación sobre lo Fantástico/Brumal. Research Journal on the Fantastic. En el caso de que, una vez evaluados positivamente, dichos requisitos no se cumplan, los manuscritos serán rechazados para su publicación.
· Recomendamos a nuestros autores/as el uso del lenguaje inclusivo en los artículos científicos.
· Nuestra revista contempla en su política editorial que los autores/as informen sobre el criterio escogido para decidir el orden de la firma y sobre la contribución específica realizada por cada uno/a de ellos/as a los trabajos publicados.
· Los artículos deben indicar la(s) agencia(s) de financiación y el(los) código(s) del (los) proyecto(s) en el marco de los que se ha desarrollado la investigación que ha dado lugar a la publicación. Este dato debe aparecer referenciado en el artículo.
Extensión y formato de los trabajos
· Los artículos no podrán superar las 9.000 palabras, incluyendo resúmenes, palabras claves, notas y bibliografía.
· Todas las colaboraciones se enviarán a través de la web de la Brumal (los autores/as tienen que registrarse) y deberán ajustarse al siguiente formato:
· Los trabajos se enviarán en formato Word.
· Tipo de letra Times New Roman, cuerpo 12.
· Interlineado de 1,5; sin espaciado anterior ni posterior entre párrafos.
· Sangría en la primera línea del párrafo de 1,25 cm.
Formato de la página inicial
La página inicial del artículo deberá incluir únicamente los siguientes elementos:
· Título del artículo en la lengua en la que esté escrito.
· Resumen, con una extensión máxima de 150 palabras, en la lengua en la que esté escrito el artículo.
· Hasta cinco palabras clave en la lengua en la que esté escrito el artículo.
· Traducción al inglés del título del artículo.
· El resumen del artículo en inglés.
· Las palabras clave del artículo en inglés.
Normas tipográficas
Fuente: La letra empleada será Times New Roman, tamaño 12, para el texto y la bibliografía final, y Times New Roman, tamaño 10, para las notas a pie de página y las citas en párrafo aparte. No se utilizará ni la negrita ni el subrayado.
Alineación: Justificada.
Interlineado: El interlineado será de 1,5 para el texto. En las notas a pie de página y en las citas en párrafo aparte se utilizará el interlineado sencillo. No hay que dejar espacio o línea en blanco entre párrafo y párrafo, por lo que se tiene que sangrar el inicio de cada párrafo, sangría que deberá hacerse con la opción específica del menú formato o diseño de párrafo; en ningún caso se empleará para este fin la barra espaciadora ni la tecla de tabulación. La sangría de los párrafos será, por defecto, de 1,25.
Notas al pie: Cuando la nota se refiera a toda la frase, la llamada irá después del signo de puntuación. En cambio, si sólo se refiere a una palabra, la llamada de nota irá junto a ella. El número de la llamada de nota irá volado y sin paréntesis.
Sistema de citas: La redacción de las referencias bibliográficas deberá seguir las pautas del sistema Harvard. He aquí algunas indicaciones:
· Toda cita, directa o indirecta, deberá remitir a la bibliografía final.
· La supresión de texto dentro de una cita se indicará con tres puntos suspensivos entre corchetes: […].
· La inclusión de las citas se realizará indicando la referencia según el siguiente esquema: (Apellido, año: página/s). Si el nombre del autor/a estuviera citado en el texto, junto a él sólo se indicará entre paréntesis (Año: página/s).
· En caso de no citar páginas concretas, sino la obra entera de un autor/a, se indicará junto al apellido de éste entre paréntesis el año de edición de la obra a la que se hace referencia.
· Cuando se citen páginas web en donde no conste ninguna fecha, entre paréntesis se anotará la fecha de consulta o de actualización de la web; si el documento no está paginado, no se incluirá la página citada.
· Cuando se citen varias obras de un mismo autor/a publicadas el mismo año, se usarán letras minúsculas junto al año de edición del texto (a, b, c…) para diferenciarlas.
· Las citas de hasta cinco líneas de extensión se incluirán en el cuerpo del texto, entrecomilladas con comillas latinas: « ».
· Las citas superiores a cinco líneas se incluirán en párrafo aparte, en tamaño de letra 10 e interlineado sencillo sin comillas. El párrafo se sangrará por la izquierda 2 centímetros.
· Las citas y referencias de textos en lenguas románicas no tienen que traducirse.
Imágenes: Si los textos van acompañados de imágenes, éstas se enviarán en alta resolución (300dpi) y deberán respetar los derechos y disponer de las licencias pertinentes bajo responsabilidad exclusiva del autor/a del artículo. Las imágenes deben insertarse en el texto acompañadas de un pie de foto en el que se indique el número de la imagen (se numerarán correlativamente) y el título o leyenda de la misma, si fuera necesario. El pie de foto se escribirá centrado en Times New Roman, cuerpo 12, de la siguiente manera y centrado: Figura x. Leyenda.Cuando el texto haga referencia a una imagen se debe indicar en el cuerpo de texto de qué imagen se trata, de la siguiente manera: (Figura x).
Bibliografía: Las referencias bibliográficas aparecerán al final del artículo, ordenadas alfabéticamente por el apellido del autor/a, con el texto justificado, interlineado sencillo y sangría frances. Como norma general, el apellido del autor/a se escribirá con letras versales. Cuando se repita la cita de un autor/a no se utilizará el guión largo, se tienen que volver a incluir todos los datos del apellido y el nombre del autor/a. Los títulos de las obras irán en cursiva y los de los capítulos de libro y los artículos, entrecomillados:
Todas las referencias bibliográficas con número DOI (Digital Object Identifier) deben aparecer con su número DOI siguiendo el siguiente esquema: <http://dx.doi.org/numeroDOI> (ver: http://papers.uab.cat/article/view/v99-n1-gonzalez-ramos-lamolla/pdf-es). Se pueden buscar las referencias bibliográficas con DOI en https://www.crossref.org/documentation/reference-linking/how-do-i-create-reference-links/
Libros:
Apellido(s), Nombre (año): Título de la obra, (traductor [trad.], cuando sea pertinente) Editorial, Lugar de publicación.
Capítulos de libro:
Apellido(s), Nombre (año): «Título del capítulo», en Nombre y Apellido(s) del editor (ed.), Título de la obra, (traductor [trad.], compilador [comp.], prologuista [pról.], etc., cuando sea pertinente), número de tomo o volumen en versales [si lo hubiera], Editorial, Lugar de publicación, páginas (pp.).
Artículos:
Apellido(s), Nombre (año): «Título del artículo», Título de la revista, número (núm.), Fecha (entre paréntesis), páginas (pp.).
Ponencias de congresos:
Apellido(s), Nombre (año): «Título de la ponencia», en Nombre y Apellidos (ed.),Título del documento fuente, Editorial, Lugar de publicación, páginas (pp.).
Películas:
Apellidos, Nombre del director (dir.) (año): Título en el idioma original (Título traducido si se utiliza una versión en otro idioma), Productora, País.
Series de televisión:
Apellidos, Nombre del creador (cr.) (año): Título en el idioma original (Título traducido si se utiliza una versión en otro idioma), Productora, País año de la 1ª temporada-año de la última temporada (no poner el último año si la serie se sigue rodando).
Artículos en red:
Apellido(s), Nombre (año): «Título del artículo», en Título de la publicación digital[si la hubiera], Año, disponible en <http://www…> [fecha de consulta].
English
ABOUT THE JOURNALFOCUS AND SCOPE
Brumal. Revista de Investigación sobre lo Fantástico/Brumal. Research Journal on the Fantastic is presented as an interdisciplinary and multilingual publication aimed at researchers and specialists.
The fantastic is understood here as an always problematic confrontation between the real and the impossible in a textual world imitating ours. Therefore, other non-mimetic genres like science fiction or fantasy, which do not adhere to this definition, are excluded in Brumal. Revista de Investigación sobre lo Fantástico/Brumal. Research Journal on the Fantastic.
Linked to the Grupo de Estudios sobre lo Fantástico (GEF, Research Group on the Fantastic) from the Universidad Autónoma de Barcelona (www.lofantastico.com), Brumal. Revista de Investigación sobre lo Fantástico/Brumal. Research Journal on the Fantastic welcomes works on the fantastic dealing with its different artistic manifestations (narrative, theatre, cinema, comic, painting, photography, TV, radio, and video-games), in any language and from any country during the 19th, 20th and 21st centuries. Texts can be sent in Spanish, Catalan, Galician, English, French, Portuguese or Italian.
Brumal. Revista de Investigación sobre lo Fantástico/Brumal. Research Journal on the Fantastic is structured in three differentiated sections (Monograph, Miscellaneous and Reviews) and will be published every six months (december and june).
SECTION POLICIES
PEER REVIEW PROCESS
PUBLICATION FREQUENCYBrumal. Revista de Investigación sobre lo Fantástico/Brumal. Research Journal on the Fantastic is structured in three differentiated sections (Monograph, Miscellaneous and Reviews) and will be published every six months (december).
Author Guidelines
Articles sent to Brumal. Research Journal on the Fantastic can be in Spanish, Catalan, Galician, English, French, Portuguese or Italian. Works have to be original previously unpublished pieces, and are not to be awaiting acceptation from any other publishing entity.
Brumal’s editorial board commits itself to notifying authors of the acceptance or rejection of their work within a maximum timeframe of three months. In accordance with the results of the reviewers’ reports, in some cases Brumal might ask the authors to modify some parts of their work before publication.
Every contribution will be sent in a digital format via the journal’s website. Authors have to register in order to send us their work. It is important to include the ORCID during registration.
· We recommend that our authors use inclusive language in scientific articles.
· Our journal contemplates in its editorial policy that the authors report on the criteria chosen to decide the order of the signature and on the specific contribution made by each one of them to the published works.
· Articles must indicate the funding agency and the code of the project in which the research that led to the publication has been developed. This data must appear referenced in the article.
Lenght and formatting
· The maximum length of articles is 9.000 words, including abstracts, keywords, footnotes and bibliography.
· Submissions will be sent via our website (authors have to register first) and will adhere to the following formatting guidelines:
· Works will be sent as Microsoft Word files.
· The font type is Times New Roman, font size 12.
· Line spacing 1,5 cm; without blank lines left between paragraphs.
· The first line should be indented by 1,5 cm.
Typographic Norms
Font: The font type will be Times New Roman 12, for the body of the text and the bibliography, and Times New Roman 10, for footnotes and quotes in separate paragraphs. Bold or underlining may not be used.
Alignment: justified.
Line spacing: line spacing will be 1,5 cm for the body of the text. Footnotes and quotations in a separate paragraph will be single spaced. No blank lines may be left between paragraphs, therefore the first line of every paragraph will be indented. This indentation will be done according to the specific option on the format menu or paragraph design . For this indentation, the space bar or the tab key may not be used. By default, the indentation of paragraphs will be 1,25 cm.
Footnotes: When the footnote refers to an entire sentence, it will be placed after the punctuation sign. However, if it only refers to a word, it will be placed immediately after this word. The number of the footnote will be without brackets.
Referencing system: The format of bibliographic references will follow the guidelines of the Harvard system. We include here some of these guidelines:
· Every quote, direct or indirect, will reappear in the final bibliography.
· When some text is omitted at the start of a quote, this quote will start with three dots between square brackets: […].
· Quotations will be included with the following referencing system: (Surname, year: page/s). If the author’s name is quoted within the body of the text, next to this name only (Year: page/s) will be indicated.
· If no specific pages are quoted but the entire work by an author, the publishing year of that work will be indicated in brackets after the surname of this author.
· When websites in which no publishing date are quoted, the date of online access or the date of update of such web will be quoted; if the document does not have page numbers, no pages will be quoted.
· If multiple works published by the same author the same year are quoted, in order to distinguish these lower case letters will be added to the publishing year (a, b, c…).
· Quotes up to five lines of extension will be included within the body of the text in Latin inverted commas: « ».
· Quotes of more than five lines will go in a separate paragraph, font size 10 and single spacing. This paragraph will be indented 2 cm on the left side.
Images: Images appearing in the text should be high resolution items (300dpi). It is the author’s responsibility to ensure that they respect the relevant copyright and licenses. Images should be inserted into the body of the text together with an image footnote indicating the image number (they will be numbered correlatively) and the title or legend, if needed. The image footnote will be centred, in Times New Roman, font size 12, as follows: Figure x. Legend. If the text refers to an image, it should be indicated which image it is within the body of the text as follows: (Figure x).
Bibliography: Bibliographic references will be placed in alphabetic order by the author’s surname at the end of the article. The text must be justified, single spaced and hanging indented. As a general rule, the author’s surname will be in small capitals. Work titles will be in italics, and inverted commas will be used for book chapters and articles:
Books:
Surname(s), Name (Year): Work’s Title, (translator [trans.] if relevant) Publishing House, Place of Publication.
Book chapters:
Surname(s), Name (Year): «Chapter’s Title», in Editor’s Name and Surname(s) (ed.), Work’s Title, (translator [trad.], compiler [comp.], prologuist [prol.], etc., if relevant), volume in italics [if there is any], Publishing House, Place of Publication, Pages (pp.).
Articles:
Surname(s), Name (Year): «Title of the article», Name of the Journal, number (no.), Date (in brackets), pages (pp.).
Conference Papers:
Surname(s), Name (Year): «Title of the Paper», in Name and Surname(s) (ed.), Title of the Source Document, Publishing House, Place of Publication, Pages (pp.).
Films:
Director’s Surname(s), Name (dir.) (Year): Title in the original language (Translated Title if a version in a different language is used), Film producer, Country.
TV series:
Creator’s Surname(s), Name (cr.) (Year): Title in the original language (Translated Title if a version in a different language is used), Film producer, Year of the first season – year of the last season (do not include the last date if the series is still being shot).
Online articles:
Surname(s), Name (Year): « Title of the article», in Name of the Online Journal [if any], Year, available in <http://www…> [date on which the website was last accessed].
Brumal. Revista de Investigación sobre lo Fantástico/Brumal. Research Journal on the Fantastic is presented as an interdisciplinary and multilingual publication aimed at researchers and specialists.
The fantastic is understood here as an always problematic confrontation between the real and the impossible in a textual world imitating ours. Therefore, other non-mimetic genres like science fiction or fantasy, which do not adhere to this definition, are excluded in Brumal. Revista de Investigación sobre lo Fantástico/Brumal. Research Journal on the Fantastic.
Linked to the Grupo de Estudios sobre lo Fantástico (GEF, Research Group on the Fantastic) from the Universidad Autónoma de Barcelona (www.lofantastico.com), Brumal. Revista de Investigación sobre lo Fantástico/Brumal. Research Journal on the Fantastic welcomes works on the fantastic dealing with its different artistic manifestations (narrative, theatre, cinema, comic, painting, photography, TV, radio, and video-games), in any language and from any country during the 19th, 20th and 21st centuries. Texts can be sent in Spanish, Catalan, Galician, English, French, Portuguese or Italian.
Brumal. Revista de Investigación sobre lo Fantástico/Brumal. Research Journal on the Fantastic is structured in three differentiated sections (Monograph, Miscellaneous and Reviews) and will be published every six months (december and june).
SECTION POLICIES
- Monograph: Articles can be sent in Spanish, Catalan, Galician, English, French, Portuguese or Italian. They have to be original previously unpublished pieces, and are not to be awaiting acceptation from any other publishing entity. The maximum length of articles is 9,000 words. They will be reviewed by two experts, using the system of a double-blind review.
- Miscellaneous: Articles can be written in Spanish, Catalan, Galician, English, French, Portuguese or Italian. They have to be original previously unpublished pieces, and are not to be awaiting acceptation from any other publishing entity. The maximum length of articles is 9,000 words. They will be reviewed by two experts, using the system of a double-blind review.
- Reviews: These are short texts commenting on, or delivering information critically about, a book or a recently published monograph on any aspect related to the fantastic. Please not that reviews that have not been previously commissioned by the Editorial board of this journal will not be accepted in Brumal.
PEER REVIEW PROCESS
- Revista de Investigación sobre lo Fantástico/Research Journal on the Fantastic foresees for the selection of its articles the submission of each one of them to an evaluation by experts in the area. However, the editorial committee may be rejected the articles received on a first reading, if they do not meet the necessary criteria in terms of quality and content.
- The evaluation of the articles will be carried out by external experts to the publishing entity and its drafting committee. All articles received will be evaluated by two specialists, at least. The journal's review policy is carried out through blind peer evaluation, so that neither authors nor reviewers know the identity of the other party.
- The evaluators will issue their respective reports to the editorial committee, who is ultimately responsible for the final decision on the publication of the works. At the time of notifying the authors of the final decision, the respective reports will be sent to them.The journal reserves the right to postpone the publication of a previously selected article for internal programming reasons, after notifying its author. Likewise, it reserves the right to cancel the publication of a previously selected article if it does not meet the deadlines required by the editorial committee during its selection or production process. It is the responsibility of the authors themselves to comply with the required deadlines at each stage of the presentation and production.
- The maximum review time for an article is 6 months.
PUBLICATION FREQUENCYBrumal. Revista de Investigación sobre lo Fantástico/Brumal. Research Journal on the Fantastic is structured in three differentiated sections (Monograph, Miscellaneous and Reviews) and will be published every six months (december).
Author Guidelines
Articles sent to Brumal. Research Journal on the Fantastic can be in Spanish, Catalan, Galician, English, French, Portuguese or Italian. Works have to be original previously unpublished pieces, and are not to be awaiting acceptation from any other publishing entity.
Brumal’s editorial board commits itself to notifying authors of the acceptance or rejection of their work within a maximum timeframe of three months. In accordance with the results of the reviewers’ reports, in some cases Brumal might ask the authors to modify some parts of their work before publication.
Every contribution will be sent in a digital format via the journal’s website. Authors have to register in order to send us their work. It is important to include the ORCID during registration.
· We recommend that our authors use inclusive language in scientific articles.
· Our journal contemplates in its editorial policy that the authors report on the criteria chosen to decide the order of the signature and on the specific contribution made by each one of them to the published works.
· Articles must indicate the funding agency and the code of the project in which the research that led to the publication has been developed. This data must appear referenced in the article.
Lenght and formatting
· The maximum length of articles is 9.000 words, including abstracts, keywords, footnotes and bibliography.
· Submissions will be sent via our website (authors have to register first) and will adhere to the following formatting guidelines:
· Works will be sent as Microsoft Word files.
· The font type is Times New Roman, font size 12.
· Line spacing 1,5 cm; without blank lines left between paragraphs.
· The first line should be indented by 1,5 cm.
Typographic Norms
Font: The font type will be Times New Roman 12, for the body of the text and the bibliography, and Times New Roman 10, for footnotes and quotes in separate paragraphs. Bold or underlining may not be used.
Alignment: justified.
Line spacing: line spacing will be 1,5 cm for the body of the text. Footnotes and quotations in a separate paragraph will be single spaced. No blank lines may be left between paragraphs, therefore the first line of every paragraph will be indented. This indentation will be done according to the specific option on the format menu or paragraph design . For this indentation, the space bar or the tab key may not be used. By default, the indentation of paragraphs will be 1,25 cm.
Footnotes: When the footnote refers to an entire sentence, it will be placed after the punctuation sign. However, if it only refers to a word, it will be placed immediately after this word. The number of the footnote will be without brackets.
Referencing system: The format of bibliographic references will follow the guidelines of the Harvard system. We include here some of these guidelines:
· Every quote, direct or indirect, will reappear in the final bibliography.
· When some text is omitted at the start of a quote, this quote will start with three dots between square brackets: […].
· Quotations will be included with the following referencing system: (Surname, year: page/s). If the author’s name is quoted within the body of the text, next to this name only (Year: page/s) will be indicated.
· If no specific pages are quoted but the entire work by an author, the publishing year of that work will be indicated in brackets after the surname of this author.
· When websites in which no publishing date are quoted, the date of online access or the date of update of such web will be quoted; if the document does not have page numbers, no pages will be quoted.
· If multiple works published by the same author the same year are quoted, in order to distinguish these lower case letters will be added to the publishing year (a, b, c…).
· Quotes up to five lines of extension will be included within the body of the text in Latin inverted commas: « ».
· Quotes of more than five lines will go in a separate paragraph, font size 10 and single spacing. This paragraph will be indented 2 cm on the left side.
Images: Images appearing in the text should be high resolution items (300dpi). It is the author’s responsibility to ensure that they respect the relevant copyright and licenses. Images should be inserted into the body of the text together with an image footnote indicating the image number (they will be numbered correlatively) and the title or legend, if needed. The image footnote will be centred, in Times New Roman, font size 12, as follows: Figure x. Legend. If the text refers to an image, it should be indicated which image it is within the body of the text as follows: (Figure x).
Bibliography: Bibliographic references will be placed in alphabetic order by the author’s surname at the end of the article. The text must be justified, single spaced and hanging indented. As a general rule, the author’s surname will be in small capitals. Work titles will be in italics, and inverted commas will be used for book chapters and articles:
Books:
Surname(s), Name (Year): Work’s Title, (translator [trans.] if relevant) Publishing House, Place of Publication.
Book chapters:
Surname(s), Name (Year): «Chapter’s Title», in Editor’s Name and Surname(s) (ed.), Work’s Title, (translator [trad.], compiler [comp.], prologuist [prol.], etc., if relevant), volume in italics [if there is any], Publishing House, Place of Publication, Pages (pp.).
Articles:
Surname(s), Name (Year): «Title of the article», Name of the Journal, number (no.), Date (in brackets), pages (pp.).
Conference Papers:
Surname(s), Name (Year): «Title of the Paper», in Name and Surname(s) (ed.), Title of the Source Document, Publishing House, Place of Publication, Pages (pp.).
Films:
Director’s Surname(s), Name (dir.) (Year): Title in the original language (Translated Title if a version in a different language is used), Film producer, Country.
TV series:
Creator’s Surname(s), Name (cr.) (Year): Title in the original language (Translated Title if a version in a different language is used), Film producer, Year of the first season – year of the last season (do not include the last date if the series is still being shot).
Online articles:
Surname(s), Name (Year): « Title of the article», in Name of the Online Journal [if any], Year, available in <http://www…> [date on which the website was last accessed].